Type: Power Factor Controller
Measuring system: Micro-processor system for balanced three-phase networks or single-phase networks
Operating voltage: 100 … 240 V AC
Frequency range: 50 or 60 Hz
Current input: 1A or 5A (RMS)
Current input impedance: <0.1 Ohm
Output contact rating:
- Max. continuous current: 1.5A.
- Max. peak current: 5A.
- Max. voltage: 440 Vac.
- Terminal A is rated for a continuous current of 16A.
Consumption: 15 VA max.
Power outage reset delay time: 40s.
Power factor setting: From 0.7 inductive to 0.7 capacitive
Operating temperature: -10° C to 70° C.
Contacts: 2 Normally closed
Number of outputs: RVC 6: 6
Front plate protection: IP40
Dimensions: 144 x 144 x 80 mm