Omron E3X-HD11 Smart Fiber Sensor
| Ref No | 13917, 4548583104259 |
| output | NPN |
| Connecting method | Pre-wired |
| Light source (wavelength) | Red, 4-element LED (625 nm) |
| Power supply voltage | 12 to 24 VDC ±10%, ripple (P-P) 10% |
| (Current consumption | 22 mA max. at 24 VDC, 44 mA max. at 12 VDC) |
| Eco LO 640 mW max. (Current consumption | 26 mA max. at |
| Control output Load power supply voltage | 26.4 VDC max., open- |
| Load current | Groups of 1 to 3 Amplifier Units: 100mA max., |
| Groups of 4 to 16 Amplifier Units | 20mA max. |
| Residual voltage | At load current of less than 10 mA: 1 V max., |
| At load current of 10 to 100 mA | 2 V max. |
| OFF current | 0.1 mA max. |
| Protection circuits | Power supply reverse polarity protection, output short-circuit protection and output reverse polarity protection |
| Response time, Super-high-speed mode (SHS) | NPN outputs: Operate or reset: 50 µs,PNP outputs: Operate or reset: 55 µs |
| High-speed Mode | (HS) Operate or reset: 250 µs (default setting) |
| Standard Mode | (STND) Operate or reset: 1 ms |
| Giga-power Mode | (GIGA) Operate or reset: 16 ms |
| Maximum connectable Units | 16 units |
| Mutual interference prevention | Possible for up to 10 units (optical communications sync) |
| Auto power control (APC) | Always ON |
| Other functions | Power tuning, differential detection, DPC, timer (OFF-delay, ON-delay, or one-shot), |
| Ambient illumination | (Receiver side) Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max. |
| Stock key | CON003 |
| Condition | New |
| SKU | 1100893 |
| Weight | 0,08 |
