Wago 787-722 Power Supply
Utilisé
En stock1 unitéPrêt à être expédié
Switched-Mode Power Supply The WAGO 787-722 is a single-phase 120 W power supply providing 24 VDC at 5 A, designed for reliable power delivery in industrial automation and control systems.
Stock massif
Expédition mondiale
Support Expert
Qualité garantie
| Phases | 1 |
| Nominal input voltage Ui nom | 1 x 110 … 240 VAC |
| Input voltage range | 1 x 100 … 264 VAC |
| Nominal mains frequency range | 47 … 63 Hz; 0 Hz |
| Input current Ii | = 0.7 A (230 VAC); = 1.6 A (115 VAC) |
| Power factor correction (PFC) | Active |
| Nominal output voltage Uo nom | 24 VDC (SELV) |
| Default Setting | 24 VDC |
| Nominal output current Io nom | 5 A (24 VDC) |
| Nominal output power | 120W |
| Deviation | = 1 % |
| Overload behavior | Constant power (in overload range: 1.15 … 1.4 x Io nom); Shutdown and automatic restart in the event of a short circuit |
| Signaling | 1 x DC OK LED (green)/1 x Overload LED (red) |
| Internal fuse | F 3.15 A / 250 VAC |
| Backup fuse (recommended) | Circuit breaker: 10 A, 16 A; ripping characteristic: B or C |
| Protection type | IP20; per EN 60529 |
| Overvoltage category | II |
| Pollution degree | 2 |
| Operation status indicator | Green LED (24 VDC OK)/Red LED (overload) |
| Width | 75 mm |
| Height | 92 mm |
| Depth from upper-edge of DIN-rail | 136 mm |
| Fire load | 4.8MJ |
| Standards | EN60950-1, EN61000-6-2,EN61000-6-3 |
| Stock key | CON003 |
| Condition | Used |
| SKU | 1100645 |
| Weight | 0,73 |
