Rexroth MS2N03-B0BYN-CMSH0-NNNNE-NN Servomotor With Linear Actuator
Nouveau
En stock5 unitésPrêt à être expédié
Bosch Rexroth Servomotor With Linear Actuator High-performance Bosch Rexroth MS2N03-B0BYN-CMSH0-NNNNE-NN servomotor integrated with EMC-040-NN-2 electromechanical cylinder, offering 600 VAC operation, 3.75 Nm torque, 9000 rpm speed, 20-bit multiturn encoder feedback, IP64/IP65 protection, stainless steel actuator construction, and precision linear motion up to 100 mm stroke.
ACAutomationBoschControlDriveEncoderHighIndustrialmoMotionmotorMultiOpticalPrecisionRexrothServoServomotorSpeedSynchronousTurn
Stock massif
Expédition mondiale
Support Expert
Qualité garantie
| MNR | R911384767 |
| SN | 7260422350296 |
| FD | 22W21 |
| Rated voltage | 600 VAC |
| Maximum torque [Nm] | 3.75 |
| Standstill torque (int./ext. cooling) 100k [Nm] | 0.9 |
| Standstill Current | 1.61 A |
| Rated power | 0.37 Kw |
| Rated Current | 1.08 A |
| Rated speed [rpm] | 6470 |
| Maximum speed [rpm] | 9000.0 |
| Flange size [mm] | 58 |
| Cooling type | Self-cooling |
| Motor type | without holding brake |
| Shaft | Smooth, without shaft seal |
| Shaft length [mm] | 20 |
| Shaft diameter [mm] | 9 |
| Spigot [mm] | 40 |
| Bolt circle [mm] | 63 |
| Mounting hole (shaft) | M4 |
| International protection code | IP64 |
| Rotor inertia | Low inertia |
| Rotor inertia (without brake) value [kg/m²] | 0.000023 |
| Rotor inertia (with brake) value [kg/m²] | 0 |
| Encoder resolution | ADVANCED - digital 20 bit, ACURO@link, SIL2, PL d |
| Encoder design | Multiturn ? 4,096 revolutions absolute |
| electrical connection | Single cable connection M23, rotatable, right-angled connector |
| Standstill torque (int. cooling) 60k [Nm] | 0.73 |
| Attached with | REXROTH EMC-040-NN-2 ELECTROMECHANICAL CYLINDER |
| MNR, ELECTROMECHANICAL CYLINDER | R030537108 |
| FD, ELECTROMECHANICAL CYLINDER | 276 |
| CS, ELECTROMECHANICAL CYLINDER | 1014111987 000020 3 |
| CNR, ELECTROMECHANICAL CYLINDER | 81678925 |
| Measurement range (kN) | 5 |
| Measurement inaccuracy (kN) | ± 0.025 |
| Material | Stainless steel |
| Protection class, ELECTROMECHANICAL CYLINDER | IP65 |
| Hardness (load range) | 38 HRC |
| Operating temperature, ELECTROMECHANICAL CYLINDER | -20 ... +60 °C |
| Gear Ratio (i) | 1.00 |
| Direction of Rotation (d) | CW (Clockwise) |
| Maximum Speed (V msx) | 0.38 m/s |
| Lead (U) | 5.0 mm/U (5.0 mm per revolution) |
| Maximum Acceleration A max (m/s) | 50.00 |
| Maximum Stroke S max (mm) | 100 |
| Maximum Torque M1 max (Nm) | 4 |
| Stock key | jo-004 |
| Condition | New |
| SKU | 1096900 |
| Weight | 4,35 |
